Rinstrum D32 series, Руководство пользователя

Страница: 15 / 48

Remote Display Installation Manual
– Software Version 4.x
D300-602-202 Page 15
5. Configuration
5.1. Baud (Serial Baud Rate)
Baud rate, parity and data bits are automatically detected.
The baud rate can be 9600 or 19200. Parity and data bits
supported are:
Parity Data bits Examples Description
(N)one 8 N81, N82 No parity, 8 data bits, 1 or 2 stop bits
(E)ven 7 E71, E72 Even parity, 7 data bits, 1 or 2 stop bits
(O)dd 7 O71, O72 Odd parity, 7 data bits, 1 or 2 stop bits
(M)ark 7 M71, M72 Mark parity, 7 data bits, 1 or 2 stop bits
(S)pace 7 S71, S72 Space parity, 7 data bits, 1 or 2 stop bits
5.2. Delimiters
The instrument responds to any string that ends with the
following:
CRLF (ASCII 013, 010), or
ENQ (ASCII 05), or
any string that starts with STX (ASCII 02) and ends with
ETX (ASCII 03).
5.3. Address
The instrument has a default address of 01 however the
address can be set to 02 on the DX30 by connecting the TXD
output to the DTR input, or on the D32X by connecting the 2
pins above RXD. Most protocols are not addressed so this is
usually not necessary.