Rinstrum D32 series, Руководство пользователя

Страница: 19 / 48

Remote Display Installation Manual
– Software Version 4.x
D300-602-202 Page 19
5.4.3. Protocol 3: Ranger C
Character
Number
0 1 2 3 4 5 6 7 8 9 10
Description
S
TX
S
ign
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
S1 S2
Character
Number
11 12 13 14 15 16
Description
S3 S4
Units Units Units
E
TX
Function Description
STX Start of Transmission Character (ASCII 02H).
Sign Represents the sign of the weight reading (space for positive, dash
(-) for negative.
Weight These seven characters are a string containing the current weight
including the decimal point. If there is no decimal point, then the
first character is a space.
Examples:
( 300) with a leading space would represent 300 units.
( 3.00) Is another acceptable string, note that when the decimal
point is added the leading space is removed.
S1 Can be G/N/U/O/E representing
Gross/Net/Underload/Overload/Error, respectively. A space (ASCII
20H) can also be sent. This character may only represent one
status at any one time.
S2 Can be M representing motion or a space to represent stable.
S3 Set to Z representing centre of zero or a space to represent non-
zero.
S4 Set to one (1) to represent range one in dual-interval and dual
range mode, set to two (2) to represent range two in dual-interval
and dual range mode, otherwise send a dash (-).
Units A three character string, the first character being a space, followed
by the actual units. eg. ( kg) or ( t). If the weight reading is not
stable, the unit string is sent as ( ).
ETX End of Transmission character (ASCII 03H).