Rinstrum D32 series, Руководство пользователя, Страница: 7 / 48

Remote Display Installation Manual
– Software Version 4.x
D300-602-202 Page 7
3. Warnings and Safety
3.1. General
Instrument not to be subject to shock, excessive vibration
or extremes of temperature; before or after installation.
Inputs are protected against electrical interference, but
excessive levels of electro-magnetic radiation and RFI
may affect operation.
For full EMC or for RFI immunity, termination of the cable
shields and correct earthing of the instrument is essential.
Instrument is sensitive to excessive electrical noise and
should be installed well away from any power or switching
circuits.
3.2. Electrical Safety
For your protection all mains electrical hardware must be
rated to the environmental conditions of use.
Pluggable equipment must be installed near an easily
accessible power socket outlet.
To avoid the possibility of electric shock or damage to the
instrument, always switch off or isolate the instrument
from the power supply before maintenance is carried out.
3.3. Cleaning
•
To maintain the D32x version, never use harsh
abrasive cleaners or solvents. Wipe the instrument
with a soft cloth
slightly dampened with warm soapy
water.
•
The XD30 has been designed for high-pressure, high
temperature (80
°C)
wash-down environments. However
long periods of focused pressure at a close range will
damage the casing. Casing is chemical resistant.