Rinnai RGP-43SV, Руководство по эксплуатации

Страница: 8 / 16

Installation location
Location without a risk of
falling object
Do not use this appliance in a
location with a risk of
falling object such as
under a shelf. The object
fallen on top of it may
burn and cause fire.
Location without flammable
object such as curtain and
spray can
Do not use this
appliance near curtain
or flammable object.
These objects may
catch fire and cause
fire damage.
•
Install the appliance in a location with low humidity to ensure durability.
•
Always ensure the ventilation (air inlet/exhaust) of the place where this appliance is used, and do not block
the ventilation with any object. Be sure to maintain good ventilation while in use. Using this appliance in a
closed location for a long time may cause imperfect combustion due to low oxygen level and, which can
result in carbon monoxide poisoning.
Safety distance to combustible object and fi re prevention measures for
the surroundings
•
If the distance of at least 20cm (sides),
15cm (rear) and 100cm (top) is unavailable
between the appliance and flammable wall,
installation of a heat insulating plate is required
as shown in the illustrations on the right.
•
Be sure to observe the precautions on
installation to ensure compliance with the
Fire Prevention Ordinance. Insufficient
clearance around the appliance may result
in fire. Even if an inflammable wall is covered
with the object such as stainless steel plate,
it is necessary to maintain the same distance
as required for combustible objects.
•
Do not refurbish the appliance’s surroundings
after the installation (such as enclosing the
appliance, installation of hanging shelf).
Such a refurbishment may not be compatible
with the installation standards or cause
imperfect combustion or fire.
•
If the wall around the appliance is flammable
(such as wooden wall), be sure to keep a
distance of at least 20cm, 15cm and 100cm
for sides, rear and top respectively.
Stable, level location
Do not use this appliance in any
unstable or windy location.
Gap between ceiling and side wall
Gap between back wall side
Gap 3cm
and above
100cm and above
20cm
and above
15cm and above
Heat insulating plate
Heat insulating plate
Gap 3cm
and above
0cm and
above
80cm
and
above
0cm and
above
50cm
and
above
0cm and above 0cm and above
Leave
a gap
Material Thickness Caution
Steel plate
Stainless steel plate
0.6cm and above
0.6cm and above
Ensure a space at least
3cm and provide adequate
reinforcement to prevent
harmful deformation.
Heat insulating plate
- 7 -