•
Release your hand from the burner control knob only
after making sure that the
main burner has been
ignited.
•
The burner control knob
slightly returns up to “ON”
position.
•
Make sure that the main
burner is burning. If the
burner goes out, it means
the knob was not kept pushed in and turned long
enough. Repeat the ignition operation and hold the
knob longer.
Flame control
•
Be sure to keep the burner control knob
at the fully turned position during use.
CAUTION
•
In case of low heat grill, the flame
can be flexibly controlled with the
burner control knob but the radiation
effect will substantially be lost once the
gas is regulated. To control the heat,
adjust the grill height with the height
adjustment lever while maintaining the
burner control knob at fully turned
position.
2 Extinguishment
•
Turn the burner control
knob clockwise fully (up
to the “OFF” position).
•
Make sure that the
main burner has been
extinguished.
Re-ignition
•
Slowly turn the burner control knob counterclockwise
(towards ON direction) until it stops.
•
When re-igniting immediately after extinguishing, wait
for about 5 seconds before the next ignition attempt.
3 After use
•
Make sure that the burner control knob is at the “OFF”
position and shut off the gas valve fully.
•
Do not cover the griller with towel or newspaper.
Height adjustment lever
and top plate
Top plate
Open
Up
Down
•
The grill height can be adjusted to your
preference with the height adjustment
lever. Adjust the grill height according
to the type and size of the ingredients
to be grilled.
You may change the grill surface
height by moving the lever back and
forth while pressing the top button. Lock
the lever at your desired grill height.
•
Keep the top plate open while in use
as shown in the illustration.
Height adjustment lever
Push and turn
(OFF)
(ON)
Push and turn
(OFF)
(ON)
- 10 -
Содержание RGP-43SV
Страница 15: ......