Rinnai RGP-43SV, Руководство по эксплуатации

Страница: 3 / 16

•
Caution for the type of gas supplied
•
Ensure that the type of gas (gas group) supplied is same as the one mentioned on the nameplate of
the appliance.
•
Use of the appliance with incorrect gas type could result in carbon monoxide poisoning due to
incomplete combustion or burn injury due to explosive ignition.
•
When you move to another house, ensure that the type of gas supplied is same as the one mentioned
on the nameplate once again.
Confi rm the gas
•
About installation
•
Be sure to observe the precautions on installation to ensure compliance with the Fire Prevention
Ordinance. Insufficient clearance around the appliance may result in fire. Even if an inflammable wall
is covered with the object such as stainless steel plate, it is necessary to maintain the same distance
as required for combustible objects.
•
Do not refurbish the appliance’s surroundings
after the installation (such as enclosing the
appliance, installation of hanging shelf).
Such a refurbishment may not be compatible
with the installation standards or cause
imperfect combustion or fire.
Safety distance to combustible object
and fi re prevention measures for the
surroundings
•
If the wall around the appliance is
flammable (such as wooden wall),
be sure to keep a distance of at least
20cm, 15cm and 100cm for sides,
rear and top respectively.
Gap between ceiling and side wall
Gap between back wall side
15cm and above
Gap 3cm
and above
50cm
and
above
0cm and above 0cm and above
100cm and above
20cm
and above
Heat insulating plate
Heat insulating plate
Gap 3cm
and above
0cm and
above
80cm
and
above
0cm and
above
•
If the distance of at least 20cm (sides),
15cm (rear) and 100cm (top) is
unavailable between the appliance
and flammable wall, installation of a
heat insulating plate is required as
shown in the illustrations on the right.
Be sure to maintain a safe
distance from infl ammable object
Heat insulating plate
Material Thickness Caution
Steel plate
Stainless steel plate
0.6cm and above
0.6cm and above
•
Prevention of gas accident
Gas pipe work requires specialist qualifications and expertise. Consult your dealer.
WARNING
Example) 08.12
(Manufactured on
December 2008)
Leave
a gap
Ensure a space at least
3cm and provide adequate
reinforcement to prevent
harmful deformation.
- 2 -
Confi rm the gas type
(Model name)
(Manufactured date)
(Type of gas (gas group))
(Distributor)
(Serial No: )
<Nameplate>