Rinnai 11
RF1200TW OIM
SPECIFICATIONS
Models: RF1200TW(N/P)
Burner Media:
Ceramic Logs / Coals and Granules
Ceramic
Pebbles
Gas
Types:
Natural
Gas
Propane
Gas
Description:
Indoor Decorative Fire
Flue:
2x 200 mm stainless steel inner/ 250 mm galvanized steel outer
Minimum of 2.4 metres of flue, 3.6 metres if off-set bends are used
Flue Cowl:
AGA Approved 200 mm or 250 mm Flue Cowl(s) (dependant of flueing method)
Gas Connection:
3/8” BSPF Gas Flare onto gas control
Power:
230/240V a.c. 50hz, 1 Amp
Fan:
Tangential; 2 speed (outlet on open side of appliance)
Burner:
Bunsen type atmospheric
Gas Control:
SIT 845 with SIT 579. DBC modulating control
Ignition: Electronic
Flame Monitoring:
Flame rod
Control
Electronic control with IR remote control
NOTE
For all other specifications refer to the appliance data plate
External Glass: This appliance is able to be installed as either a room divider or on an external
wall with the addition of a piece of toughened glass. The manufacturer takes no responsibility for
providing the means of meeting any regulatory or other building requirements. There are more
details on this option covered in “External Wall Installation” on page 18
.
DIMENSIONS
Engine
Open Side
Glass Side
700
Power connection
10
3
243
20
263
20
85
70
9
670
600
1300
1320
732
Gas pipe
entry
647
* From base of engine to base of trim
602
1310
45*
1310
507 ID
466
466
510 OD
A
B
A
B
A
B
Four sided trim
Three sided trim
Note that a three or four sided
trim may be fitted to either side
of the appliance as required!
Trim
