22
|
Arriva/Evolve flue installation guide: 10726-I 09-21
Connecting the heater exhaust pipe
1. Lubricate the o-ring of the exhaust connection and fit the telescopic exhaust pipe of the heater.
Push the telescopic tube fully home so the end of the exhaust connection and the collar of the
telescopic exhaust pipe are fully mated.
2. Attach the flue locking clamp provided with the heater over the telescopic exhaust pipe and
the exhaust connection of the flue transition. Ensure the teeth of the flue locking clamp engage
both the collar of the telescopic exhaust pipe and the collar of the exhaust connection of the flue
transition. Close the clamp to secure both components together. Adjust the telescopic exhaust
pipe as necessary.
DO NOT extend the telescopic exhaust pipe beyond the indicator groove. A red line
will show if you have gone too far.
3. Adjust the telescopic exhaust pipe to attain the desired position of the heater.
4. Fix the telescopic exhaust pipe in place with the flue slide stopper (provided in the ASPKIT03/
EVOKIT03) or the flue clamp bracket (provided with the heater for Arriva Direct A/B flues).
This step in the installation is critical. If this joint is not secured properly, products of
combustion could disperse into the room being heated.
Flue slide stopper
Flue locking clamp
Telescopic extension tube
Flue exhaust
WARNING
IMPORTANT
The flue lock clamp
(4823) is provided
with the heater.
The flue slide stopper (4822) is
provided with the ASPKIT03/EVOKIT03
flue kits.
The flue clamp bracket (10550)
is provided with the heater in a
plastic bag with the remote. It is
only needed for Arriva Direct A/B
flue kits.
Attaching the flue lock clamp - Evolve example
Attaching the flue slide stopper and air hose - Evolve
Flue clamp bracket used for the Arriva direct flues
