4. How to Install Gas Monitor
4-1. Precautions for installation points
11
4
4.
How to Install Gas Monitor
4-1. Precautions for installation points
When installing the monitor, never fail to observe the following precautions.
Ignoring the precautions may damage the monitor, resulting in inaccurate gas detection.
<Do not install the monitor in a place with vibrations or shocks.>
The monitor consists of sensitive electronic parts. The monitor must be installed
in a stable place without vibrations or shocks, etc. and it cannot drop.
<Do not install the monitor in a place exposed to water, oil or
chemicals, etc.>
When selecting installation points, avoid a place where the monitor is exposed to
liquids such as water, oil, or chemicals.
<Do not install the monitor in a place where the temperature
drops below -10ºC or rises over 40ºC.>
The operating temperature of the monitor is -10 to +40ºC. Install the monitor in a
stable place not exceeding the operating temperature range.
CAUTION
This is a precision device. Because the monitor may not provide the specified performance in some
places (environments), check the environment in the installation site, and then take appropriate
actions if necessary. Because the monitor plays an important role for safety and disaster
prevention, it must be installed in appropriate points.
Do not install this product in any of the following locations.
- Place exposed to direct sunlight or outside
- Place exposed to water
- Place exposed to ventilation from an air conditioner, etc.
- Place exposed to soot, smoke or steam
- Place where the temperature drops below -10ºC or rises over 40ºC or the temperature changes
suddenly
- Place with high humidity like a bathroom
- Place with bad ventilation such as behind a curtain or under the shadow.
Содержание GM-600
