5. How to Use
5-4. Power-on
22
5-4. Power-on
- Before turning on the power switch, check that the monitor is installed properly.
- Slide the power switch up to power on and down to power off.
- Turn on the power switch.
- After the monitor completes the start-up, it enters the detection mode.
<Start-up Procedures (approximately 3 minutes for system check of the monitor and alarm
deactivation)>
Power On
▼
▼
▼
Initial clear
(approx. 3 minutes)
▼
▼
▼
Detection mode
During initial clear
External output
Power switch
ON
OFF
CAUTION
Do not turn off the monitor during the initial clear. When turning it on again, abnormal operation may
occur.
After initial clear, perform calibration.
Содержание GM-600
