Riken Keiki GM-600, Руководство по эксплуатации

Страница: 45 / 52

8. Storage and Disposal 8-1. Procedures to store the monitor or leave it for a long time
45
8
8.
Storage and Disposal
8-1. Procedures to store the monitor or leave it for a
long time
The monitor must be stored under the following environmental conditions.
- In a dark place under the normal temperature and humidity away from direct sunlight
- In a place where gases, solvents or vapors, etc. are not present
If the remote sensor continues to be unpowered, it takes long for the sensor to be stabilized. A time before
the sensor is stabilized varies depending on the unpowered time. The following table shows an
approximate time before the sensor is stabilized.
Unpowered time Initial powered time
24 hours or less 4 hours or more
72 hours or less 24 hours or more
10 days or less 2 days or more
Less than 1 month 7 days or more
Less than 3 months 14 days or more
3 months or more 1 month or more
Store the monitor in a shipping carton, if any, in which the product was delivered.
Store the monitor away from dust, etc. if the shipping carton is not available.
8-2. Procedures to relocate the monitor or use it again
When the monitor is relocated, see "Precautions for installation points" (P.11) and "Installation of monitor"
(P. 14) for relocation sites and wiring work.
For wiring work, see "Precautions for wiring" (P.17) as well. The unpowered time must be minimized when
the monitor is relocated.
8-3. Disposal of products
When the monitor is disposed of, it must be treated properly as an industrial waste in accordance with the
local regulations, etc.
Never fail to return the used sensor to RIKEN KEIKI.
If liquid is leaked from the sensor, do not touch the liquid. The sensor must be put into a plastic bag to
prevent the liquid from leaking to the outside. If any liquid leaked from the sensor is found in the monitor
unit, turn off the power and contact RIKEN KEIKI immediately.
CAUTION

When using a relocated or stopped/stored monitor again, never fail to perform a calibration. Contact
RIKEN KEIKI for information on readjustment including calibration. (RIKEN KEIKI will keep the
monitor for adjustment.)