Rigol RSA3000E Series, Руководство пользователя

Страница: 99 / 380

Chapter 2 Functions of the Front Panel of GPSA RIGOL
RSA3000E User Guide 2-41
current editing point changes along with the center frequency.

Y To Ref: When "Fixed" is selected, the amplitude of the current
editing point will not be affected by the reference level. When
"Relative" is selected, the amplitude of the current editing point is the
difference between the amplitude of the point and that of the current
reference level. At this time, if the reference level changes, then the
position of the current editing point changes along with the reference
level.

Margin State: Enables or disables the display of the margin. When
you enable the display of the margin, the measurement interface
displays the margin lines; when you disable the display of the margin,
the margin is invalid.

Margin: Sets the margin for the current limit line.

Navigation: Selects the first line of the limit line table.

Frequency: Edits the frequency of the current point. When Rel Freq is
selected, edit the frequency difference between the frequency of the
current point and the center frequency.

Amplitude: Edits the amplitude of the current point. If the Rel Ampt is
enabled, edit the amplitude difference between the amplitude of the
current point and the reference level.

Append Point: Inserts an edit point.

Delete Point: Deletes the point that you are editing.

Build From: Sets a trace for building the limit line. The range is from
Trace1 to Trace6.

Build: Builds the limit line according to the selected trace.

Copy From: Copies the selected limit line into the current limit line.
The range is from Limit1 to Limit6.

Copy: Performs the limit line copy operation.

X Offset: Sets the frequency offset of the current limit line.

Y Offset: Sets the amplitude offset of the current limit line.

Apply Offset: Adds the X and Y offsets to each point of the current
limit line, then resets the X and Y offset values to 0.
Tip: You can touch any point in the trace display window on the screen to
edit the current point to be the limit line data point. You can also drag the
point to adjust the position of the current edit point, that is, to change the
frequency/amplitude of the current point.
5) Test Trace
Sets the trace for the current limit line test.
6) Delete Limit
Deletes the currently selected limit line. The data of the current limit line
will be cleared and they will be restored to factory defaults.