RIGO Lamibind 2000 EVA, Руководство пользователя

Страница: 9 / 45

9
2.1 Installation
2.1.1 Room/area
The room in which the machine is installed has to be well aerated and dry and the
temperature range is between 5 and 35°C.
The temperature of the room, where the machine is located can absolutely affect the
binding quality, therefore the suggested temperature range is between 20-25°C. Do
not use the machine in humid (the humidity range is between 10 and 85% RH), wet,
dusty or explosive environment.
Provide good quality light and where is not subject to direct sunlight.
The machine must be placed on flat and smooth ground reasonably free from dust
and subject of no vibration, do not stand on paper waste.
Keep the area tidy around the machine.
Settle the machine to have minimum 1 meter free place round.
Operate this unit in the environment where there are no harmful chemicals and the
unit is not exposed to water.
Do not install this unit in a location where there is excessive humidity or where contact
with water is possible.
2.1.2 Fire & Explosion Hazard
Do not use flammable sprays inside or near the unit (e.g. when cleaning the unit).
2.1.3 Power Supply
The machine can be connected just to that electric network which
parameters are fulfill to the values displayed on the data table of the machine such as
nominal voltage, frequency and maximum power rating. To operate the machine
separate wire N and protective earth are necessary as well.
The machine has I. classing of protection against electric shock that is why it has to
be connected to grounded 230V 16A maximum nominal power rating socket being in
appropriate condition.
The electric socket-outlet must be easily accessible on behalf of the easier cutting off
the current, and above the floor level between 0,6 and 1,9m height.