RIGO Lamibind 2000 EVA, Руководство пользователя

Страница: 13 / 45

13
2.3.4 Milling unit
Do not touch the milling blade at any time!
Do not remove any cover of the milling unit.
Do not put your hands inside of the working area until the milling unit has been
completely stopped and the cover is completely closed.
Risk of cutting injury from sharp edges: wear gloves especially protective against
cutting.
To mill again the glued spine of the book is forbidden, this lead to
the immediate failure of the milling unit.
2.3.5 Vacuuming unit
Operation of the machine without vacuuming system is forbidden!
If the vacuuming system fails during operation, the current workflow still can be
finished, but after it the machine cannot be operated until the reparation of the
vacuuming system is done.
You must check the dust sack daily, and empty it regularly. The best time to empty
the dust sack at the end of the working week.
2.3.6 Binding/Nipping unit
Do not touch the nipping/binding unit while the machine is in operation.
2.3.7 Electrical cabinet
There are high voltage parts inside the machine. Do not remove the cover.
The occurred electric reparation can be made just by a specialist.
Always grip the plug when disconnecting the power plug from the power outlet.