background image

This manual describes the correct use of the product as well the usage precautions to be observed.    To 
obtain full-expected performance from the product, thoroughly read this manual. 

 

Also, store this manual at an easily accessible place so that you can promptly refer to it whenever   
it is necessary.

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 
 

 

The contents of this manual are subject to change without prior notice.

 

 

This manual described in it may not be disclosed to a third party or copied, in whole or in part, without 
the written consent of Rigaku Corporation.

 

 

In no event will Rigaku Corporation be responsible for the results of the use of this manual.

 

 

As a rule, one set of the instruction manual has to be purchased for each product.

 

 

If there are any missing or incorrectly collated pages in the delivered instruction manual, please 
contact the sales representative who you purchased the instrument from for instruction manual 
replacement.

 

 

Microsoft, Windows, Windows XP, Windows Vista, Windows 7, Microsoft Internet Explorer, Microsoft Excel, and 
Microsoft Word Operating System are either registered trademarks or trademarks of Microsoft 
Corporation in the United States and/or other countries.

 

The ™ and ® marks have been omitted.

 

 

Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of Adobe Systems 
Incorporated in the United States and/or other countries.

 

The ™ and ® marks have been omitted.

 

 

The names of actual companies and products mentioned herein may be the registered trademarks or 
trademarks of their respective owners. 

 

Содержание XtaLAB mini












Отзывы: