Rigaku XtaLAB mini, Инструкция по эксплуатации, Страница: 7 / 11

－
3
－
ME12973A
(11) Locate the cable from the gonio cover for cryogenic gas suction unit. Pass the cable through
the hole at the center of the Omega axis to reach the back side of the goniometer (Fig.4). Next
attach the gonio cover for cryogenic gas suction and the cryogenic gas suction tube.
(12) Confirm the cable at the rear side of goniometer goes through the hole along the Omega axis.
Pass the cable through the wiring duct (Fig. 5) near the USB ports at the rear of the XtaLAB
mini .
(13) Remove the USB extention port in the XtaLABmini rear to get a hole. Pass the adapter cable
through the hole. Connect the adapter cable with the cable of the gonio cover for cryogenic
gas suction described in step (12). (Fig.6)
Fig.6 Cable connection
Fig.4 Cable wiring -1
Fig.5 Cable wiring -2