Riester metpak, Инструкция по эксплуатации

Страница: 15 / 48

15
6. Spare parts and accessories
Art.no. 11235 Pad for 500 ml
Art.no. 11236 Pad for 1000 ml
Art.no. 11235-536 Pad for 3000 ml
Art.no. 11235-537 Pad for 5000 ml
Art.no. 11237 Cuff cover for 500 ml models
Art.no. 11238 Cuff cover for 1000 ml models
Art.no. 11237-536 Cuff cover for 3000 ml models
Art.no. 11237-537 Cuff cover for 5000 ml models
Art.no. 11239 Cuff cover with pad for 500 ml models
Art.no. 11240 Cuff cover with pad for 1000 ml models
Art.no. 11239-536 Cuff cover with pad for 3000 ml models
Art.no. 11239-537 Cuff cover with pad for 5000 ml models
Art.no. 11241 Manometer
Art.no. 11242 Bulb
Art.no. 10363 Air release valve
7. Maintenance / accuracy check / calibration
The metpak and its accessories require no special maintenance. To check ac-
curacy please remove the tube from the manometer and hold the manometer
in vertical position. If the pointer stops on the zero indicator of the scale, the
device is accurate / in calibration. If the pointer is outside of the zero position,
you should return the device to Riester or to an authorized RIESTER dealer in
your area. We are happy to provide contact information of authorized Riester
dealers upon request.
8. Disposal
Caution!
The used medical device must be disposed of in accordance with the medical
practices in place, or local regulations for disposal of infectious
biological medical waste.
Batteries and electrical/electronic equipment must bedisposed of in accor-
dance with local regulations, not together with domestic waste.
If you have any questions about the disposal of products, please contact the
manufacturer or a manufacturer representative.
9. Warranty
This product was manufactured to the highest quality standards and subjected
to a thorough final inspection before leaving our factory.
We are pleased to issue a warranty of 2 years from the date of purchase on
all defects traceable to material or manufacturing defects. A warranty claim is
excluded from cases of improper handling or use.
All defective parts will be replaced or repaired free of charge within the war-
ranty period. This excludes wear parts.
A warranty claim can only be made if the product is accompanied by this war-
ranty card, which is filled out in full and stamped by the dealer.
Please note that warranty claims must be made within the warranty period.
We are of course happy to charge for checks or repairs after the expiry of the
warranty period. We also offer free, no-obligation quotes.
In case of warranty coverage or repair, we ask you to return the RIESTER pro-
duct with the completed warranty card to the following address:
Rudolf Riester GmbH
Dept. Repairs RR
Bruckstr. 31
D-72417 Jungingen
Germany
Serial number or batch number,
date, stamp and signature of the specialist dealer