Riello RS 160/EV BLU TC, Инструкции по установке, использованию и обслуживанию

Страница: 50 / 76

20095002
48 GB
Start-up, calibration and operation of the burner
403 VSD control curve ratio (only curve setting) 13 (°) Modification 20° 100° 0.1°
0°; 100°;
50°; Not
defined
Service Mode
500 POSITIONING OF SERVOMOTORS
501
Position of the fuel servomotor in absence
of flame
Index 0 = standby position
Index 1 = pre-purging position
Index 2 = post-purging position
3 (°) Modification 0° 90° 0.1° 0°; 0°; 15° Service Mode
502
Position of the air servomotor in absence of flame
Index 0 = standby position
Index 1 = pre-purging position
Index 2 = post-purging position
3 (°) Modification 0° 90° 0.1° 0°; 90°; 45° Service Mode
503
VSD speed without flame
Index 0 = standby speed
Index 1 = pre-purging speed
Index 2 = post-purging speed
3 (°) Modification 0° 100° 0.1° 0°; 100°; 50° Service Mode
522 Acceleration 1 s Modification 5 s 20s 1s 10s Service Mode
523 Deceleration 1 s Modification 5 s 20s 1s 10s Service Mode
542
VSD/PWM activation
0 = Deactivated
1 = Activated
1 - Modification 0 1 1 0 Service Mode
545
Minimum modulation limit
Not defined = 20%
1 %
Modification /
zero setting
20% 100% 0.1% Not defined Service Mode
546
Maximum modulation limit
Not defined = 100%
1 %
Modification /
zero setting
20% 100% 0.1% Not defined Service Mode
600 SERVOMOTORS
606
Tolerance limit for position check (0.1°)
Index 0 = fuel
Index 1 = air
More serious position error, where a defect has cer-
tainly been detected
- > Stop range: (P 606 - 0.6°) a P606
2 (°) Modification 0.5° 4° 0.1° 1.7°; 1.7° Service Mode
641
VSD speed standardisation control
Negative value error diagnostics (see error code 82)
0 = standardisation deactivated
1 = Standardisation active
1 - Modification -25 1 1 0 Service Mode
642
Standardised speed
Index 0 = speed 1
Index 1 = speed 2
2 - Reading only 650 6500 0.1 Not defined Service Mode
645
Analogue exit configuration
0 = DC 0...10 V
1 = DC 2...10 V
2 = DC 0 / 2...10 V
1 - Modification 0 2 1 2 Service Mode
700 LOG OF THE ERRORS
701 Error chronology: 701-725.01.Code 25 - Reading only 0 255 1 0 Info mode
• Error chronology: 701-725.02.Diagnostic code 25 - Reading only 0 255 1 0 Info mode
• Error chronology: 701-725.03.Error class 25 - Reading only 0 6 1 0 Info mode
• Error chronology: 701-725.04.Phase 25 - Reading only 0 255 1 0 Info mode
• Error chronology: 701-725.05.Start-up meter 25 - Reading only 0 99999999 1 0 Info mode
725 Error chronology: 701-725.06.Load 25 % Reading only 0% 100% 0.1% 0% Info mode
900 PROCESS INFORMATION
903
Actual output
Index 0 = fuel
Index 1 = air
2 % Reading only 0% 100% 0.1% 0% Info mode
922
Position of the servomotors
Index 0 = fuel
Index 1 = air
2 (°) Reading only -50° 150° 0.01° 0° Info mode
935 Absolute speed 1 - Reading only 0 6553,5 0.1 0 Service mode
936 Standardised speed 1 % Reading only -200% 200% 0.1% 0% Info mode
942
Heat source active
1 = output during the definition of the curves
2 = manual output
3 = BACS output
4 = analogue input output
5 = output of the external load regulator contacts
1 - Reading only 0 255 1 0 Service mode
Parameter
No. ele-
ments
Unit of
measure
Modifica-
tion
Value range
Degree of
accuracy
Default
setting
Acces mode
No. Description Min. Max.