Riello RS 160/EV BLU TC, Инструкции по установке, использованию и обслуживанию

Страница: 44 / 76

20095002
42 GB
Start-up, calibration and operation of the burner
6.9 Backup / Restore procedure
At the end of the "Start-up procedure" it is wise to carry out a
backup, creating a copy of the data memorised on the REC, in
the RDI 21 display panel.
This will allow the data to be used for programming a new REC
or to return to the memorised settings of the same REC.
6.9.1 Backup
To perform the backup, proceed as follows:

access the Parameters Level referring to "Access proce-
dure with password" on page 37.
The display screen displays the parameters group 400 .
With the key "-" :
Select the parameters group 000 :
The 000 parameter blinks, confirm using the “i/reset” key:
The display screen shows parameter 050 blinking:
Confirm with the key “i/reset” :
The parameter bAC_UP appears on the display screen:
confirm with the key “i/reset” :
The display screen shows the following value:
Use the button “+” :
The value will be set to 1 . Value 1 is flashing:
confirm with the button “i/reset” to activate the backup process.
The value 1 appears on the display screen:
After approx 5 seconds (it depends on the duration of the pro-
gramme), the 0 value appears on the display screen, this is to in-
dicate that the backup process has been completed correctly.
WARNING
We suggest that this operation be carried out at
the end of any intervention that involves modifica-
tions to what has been set on the cam.
This will allow you to carry out a restore in a simple
manner on a new cam supplied as a replacement
part, without having to reprogramme the system.
D9023
P
V
%
s min h
D12140
h min s
%
P
/reset
D12141
h min s
%
P
/reset
D12142
h min s
%
P
V
/reset
D121
43
h min s
%
P
V
D
1
2144
h min s
P
V
/reset
D
1
2145
h min s
%
P
V
D12
143
h min s
%
P
V