Riello RS 160/E O2 BLU, Инструкции по установке, использованию и обслуживанию

Страница: 27 / 60

25 20164541 GB
Installation
Example:
burner output = 500 kW.
For this output, according to diagram Fig. 20, the adjustments to
do are:
–
R1 air= notch 6
– R2 central gas/air= notch 2
NOTE:
the diagram (Fig. 20) indicates the optimum adjustment for a
type of boiler according to Fig. 4 at page 11.
Once the combustion head adjustment is completed:

reassemble the burner on the guides 3) at about 100 mm
from the pipe coupling 4) - burner in the position shown in
Fig. 17;

insert the probe and electrode cables, then slide the burner
as far as the pipe coupling - burner in the position shown in
Fig. 21;

connect the socket of the maximum gas pressure switch;

refit the screws 2) on the guides 3);

fix the burner to the pipe coupling with the screws 1).
WARNING
The adjustments indicated can be modified during
the initial start-up.
Fig. 20
No. notches
Max burner output
20162099
WARNING
When fitting the burner on the two guides, it is
advisable to gently draw out the high voltage
cable and flame detection probe cable until they
are slightly taut.
5
1
4 3 2
20113906
Fig. 21