on the frame and out of direct tire spray. The
hose on the drain should be coming straight
out of the bottom. There is a drain in the bot-
that might get into the housing. Be sure that
!
ing to the compressor assembly.
7. The Axle bracket can be mounted in any
location on the axle tube to get the sensor
linkage to line up. The Axle mount should
be mounted on the axle so that the linkage
will line up from the axle mount to the sensor.
Keep this in mind when establishing the sen-
sor location.
8. The next step will be to mount the sen-
sor. The Smart Sensor needs to be centered
in its travel at the trucks ride height to oper-
ate properly. This can be done by cutting the
$
loosening the 4 sensor mounting screws and
twisting it in the mount and retightening the
4 screws. When the mounting and linkage
is done it should look like the diagram seen
here.
Page 7
