Ricoh VD4007001, Руководство по эксплуатации

Страница: 22 / 136

14
D
Adjust the paper guides to the paper size, and then gently insert a sheet
face up into the one-sheet bypass tray.
If the paper guides are not flush against the paper, skewing and misfeeds
might occur.
1.
Paper Guide
• Gently insert a sheet until the machine pulls it into the tray automatically.
If the sheet is not inserted straight, reinsert it.
• Do not insert multiple sheets. The one-sheet bypass tray is only available
for one sheet.
• If paper is left on the one-sheet output tray, you cannot insert paper into
the one-sheet bypass tray.
E
Set paper size using the printer driver and the control panel.
For details, see p.15 “Setting the Paper Size and Paper Type of the One-Sheet
Bypass Tray”.
Note
❒
Paper within the following dimensions can be set in the one-sheet bypass tray:
• Vertical: 90 - 305 mm (3.55 - 12.00 in.)
• Horizontal: 148 - 600 mm (5.83 - 23.62 in.)
❒
Be sure to set the paper with the side you want to print facing up in the
one-sheet bypass tray.
❒
The number of sheets that can be loaded in the one-sheet bypass tray de-
pends on the paper type.
Reference
For details about setting paper in the regular paper tray, see "Loading Pa-
per into Paper Tray 1", Troubleshooting.
When loading custom size paper, see p.16 “Setting Custom Size Paper”.
When loading thick paper (over 104.7 g/m
2
), OHP transparencies, or en-
velopes, set paper size and paper type. For details, see p.18 “Setting Thick
Paper, OHP Transparencies, or Envelopes”.
When loading letterhead paper, pay attention to its orientation. For details
about Letterhead Setting, see “System Settings” or “Printer Features”,
General Settings Guide.
1
AMO011S