Ricoh VD4007001, Руководство по эксплуатации

Страница: 20 / 136

12
Using the One-Sheet Bypass Tray
Inserting Paper into the One-Sheet Bypass Tray
This section gives instructions for setting paper on the one-sheet bypass tray.
For details about paper size and paper type, see “Recommended Paper Sizes and
Types”, About This Machine.
Important
❒
The following functions are disabled when printing from the one-sheet by-
pass tray:
• Duplex Printing
• Auto Tray Select
• Auto Tray Switching
• Rotating Collate
❒
Use the one-sheet bypass tray to print OHP transparencies, glossy paper, and
thick glossy paper. Do not load onto other paper trays.
❒
To print on glossy paper or thick glossy paper using
[ Quality ]
mode, you must
install Upgrade Option type C1800.
❒
Only the RPCS printer driver supports printing on glossy paper or thick
glossy paper.
❒
Be sure to open the one-sheet output tray. A sheet loaded on the one-sheet by-
pass tray is printed from the one-sheet output tray only.
❒
Use the one-sheet bypass tray to print on paper that is thicker than 162 g/m
2
(max. 264 g/m
2
). Do not use other trays, as paper jams and other malfunc-
tions will occur.
❒
You cannot print or insert paper into the one-sheet bypass tray during print-
ing.
❒
Be sure not to leave any paper on the one-sheet bypass tray or on the one-
sheet output tray, as this will cause a malfunction. After each print job, be
sure to remove any printed sheets from the one-sheet output tray.
❒
Be sure to close the one-sheet bypass tray and the one-sheet output tray after
using them. If you do not close these trays, other trays cannot be used.
A
Open the bypass tray.
ALZ037S