Ricoh SP 230SFNw, Руководство по обслуживанию

Страница: 69 / 255

2-48
Confidential

Error code 9309
Detected that there was no paper set in all trays when TrayAuto was selected for printing.
Error code 930A
Paper ran out during FAX / List continuous printing.
<User Check>
• Set paper in the paper tray.

Error code 9701
For 2-sided printing, paper size setting of the printer driver that was not supported by 2-sided
printing was selected.
Error code 9702
For printing by feeding paper from the paper tray, the size of paper specified from the driver
set the size which was not supported by the paper tray.
<User Check>
• Select the specified paper size in the driver and set paper with the same size to the specified
paper tray.
 Error code A200
The document scanning position sensor detected that the document length was 90 cm or
more during the one-side scanning.
<User Check>
• Use the paper less than A4 size.
• Remove the jammed document.
Step Cause Remedy
1
Connection failure of the T1
paper feed sensor harness Reconnect the T1 paper feed sensor
harness.
2
Connection failure of the T1
clutch harness Reconnect the T1 clutch harness.
3
T1 paper feed actuator caught in
some sections of the machine Reattach the T1 paper feed actuator.
4 Abrasion of the PF kit 1 Replace the PF kit 1.
5
T1 paper feed sensor PCB
failure Replace the T1 paper feed sensor PCB
ASSY.
6 T1 clutch failure Replace the T1 clutch.
7
Damaged gears in the paper
feed drive system
Replace the frame L unit.
8 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Document scanning position
actuator caught in some sections
of the machine Reattach the document scanning position
actuator.