SYSTEM FEATURES
14 June, 2002
6-60
Important Points About Energy Saver and Standby
1. While the machine is in the Energy Saver Mode, it can continue to send
documents standing by in memory for transmission.
2. If the machine receives a document while it is in the Energy Saver mode, the
Receive File indicator lights and the machine prints the received document. If
the machine receives a confidential document, the Confidential
Reception/Memory Lock indicator lights, and the machine returns to the
selected standby mode. If the machine receives a message while in the
memory lock mode, the Confidential Reception/Memory Lock indicator flashes,
and the machine returns to the selected standby mode.
3. While the night timer is on (the fusing lamp is off), if the machine is released
from the energy saver mode by pressing the Clear Modes/Energy Saver key,
setting and original for sending or copying, or using off hook dialing, the
machine is released from the energy save mode temporarily and any
documents received in memory are printed.
4. When the amount of memory remaining does not meet the requirements for
memory reception, the machine shifts to the fax standby mode (energy save
standby mode is disabled regardless of user parameter settings). The machine
cannot receive documents in memory when:
•
The amount of memory remaining is below the threshold setting of
Communication Switch 0D that allows memory reception only if sufficient
memory exists.
•
Memory reception has been disabled with User Parameter SW05 Bit 0.
•
Memory reception is disabled with System Switch SW11 Bit 6 (no reception
unless RTI or CSI received).
