Ricoh M095 Скачать руководство пользователя страница 102

Страница: 102 / 184

102

PE-MF3/PE-P2 Training

Slide 102

After you Replace the Laser Optics Housing Unit (4)

If MUSIC was not successful, do the
following.

1. Open the upper cover and check

the lot number of the laser optics
housing unit.

2. Check to see if this lot number is

listed in any of the Excel files that
are supplied periodically. If it is,
then do the rest of this procedure.

3. Open the front cover and turn on

the machine.

4. Input the setting values for the

laser optics housing unit with "LSU
Adjustment” in the "Engine
Maintenance" menu.

5. Close the front cover.
6. Execute "Color Registration" in the

"Engine Maintenance" menu.

7. Turn the main switch off/on.

MUSIC will be performed
automatically.

Steps 3 to 7 are a repeat of slide 1 of this procedure, except that we use the
numbers from the excel file, and not from the printed sheet that comes with the
unit.

Содержание M095

























































































































































































Результаты поиска

Содержание M095

Отзывы:

Похожие инструкции для M095

Бренды по названию

Популярные бренды

Ricoh M095, Обучение по обслуживанию

Результаты поиска

Содержание M095

Отзывы:

Похожие инструкции для M095

Бренды по названию

Популярные бренды