Ricoh M C250FW, Руководство по обслуживанию на месте

Страница: 258 / 324

6.Troubleshooting
246
Error code Description
FFF0 For AIO in use, cannot be calculated.
FFF1 Number of machine prints is “0”, cannot be calculated.
FFF2 Number of BW/Color prints for AIO in use is "0", cannot be calculated.
FFF3 Calculation for Bk rate exceeds upper or lower limit.
FFF4 Division by "0" in Print rate, cannot be calculated.
FFF5 Division by "0" in Main printing P/J, cannot be calculated.
Machine Operation with Toner Level Alert
The toner levels and descriptions are listed in the following table.
Job Toner level Machine operation Note
K CMY
*1
Color printing Not End Not End Printing OK
Not End End Cannot print
End Not End Cannot print
End End Cannot print
BW printing Not End Not End Printing OK
Not End End Printing OK
End Not End Cannot print
End End Cannot print
Fax TX Not End Not End TX OK
Not End End TX OK
End Not End Cannot TX This is for the TX result report output.
End End Cannot TX
Fax RX Not End Not End RX OK
Not End End RX OK
End Not End Memory RX OK
End End Memory RX OK
*1: Color printing is not possible if even one color is at toner end.
Estimated Toner Yield for Each Print Condition
The print yield for any toner is affected by variables such as paper type, paper size, contents of the print
job, and ambient conditions. Depending on machine usage, the replacement alert can appear earlier.
Reference values (For high yield AIO)
Print rate Print condition (P/J) Number of sheets printed (K sheets)
10% 1 2.3
2 2.9