Ricoh InfoPrint XT, Инструкция по установке и эксплуатации

Страница: 45 / 202

also writes a line number from the module, which indicates the line at which the
condition that caused the message occurred. The expanded output is similar to
this:
pdxtclnwork: (aioxcwrk0139) 5016-001 The command option -o is not valid.
This message shows that the error resulted from a pdxtclnwork command and that
the error occurred at line 0139 of the module aioxcwrk .
Set the PDXT_INTMSGIDS variable to 1 to include module and line number
information. Remove the environment variable to suppress the module and line
number information.
Controlling the format of the error sheet (PDXT_MSG xxxxxxx )
If you submit a Xerox job for processing in a combined InfoPrint Manager and
InfoPrint XT installation and severe errors occur that prevent InfoPrint XT from
generating AFP output, InfoPrint XT generates an error sheet. InfoPrint XT uses
four environment variables and the InfoPrint Manager line2afp transform to
generate the error sheet. Typically, you only change the default settings for these
environment variables if you use a medium other than letter, such as A4 paper:
PDXT_MSGFOLDCMD
Controls how the message lines of the error sheet wrap on the page.
InfoPrint XT uses standard input (STDIN) to pass the messages to the
command specified by the environment variable. Then, InfoPrint XT pipes
the output from the command to the InfoPrint Manager line2afp
command. If you do not set this variable, InfoPrint XT uses fold -w 120 .
PDXT_MSGFONTDEF
Controls the font definition that InfoPrint XT uses to generate the error
sheet. If you do not set this variable, InfoPrint XT uses trc=no chars=4282 .
PDXT_MSGFORMDEF
Controls the form definition that InfoPrint XT uses to generate the error
sheet. If you do not set this variable, InfoPrint XT uses F1MG0110 .
PDXT_MSGPAGEDEF
Controls the page definition that InfoPrint XT uses to generate the error
sheet. If you do not set this variable, InfoPrint XT uses
P1A08682
.
Note:
When InfoPrint XT generates the error sheet, it also writes the results of
line2afp transform processing for the error sheet. The line2afp.lst file in the
working directory for the job contains the information. The default working
directory is %PDXTWORKDIR%\jobs\ ServerName_JobIdentifier.
Environment variables for directives
Two other InfoPrint XT environment variables are specific to transform directives
and to installations that use Download for z/OS. Because other considerations for
their use exist, this publication describes them in individual topics. See:
v “Using transform directives” on page 29
v
“Enabling download directives” on page 78
Chapter 3. Customizing InfoPrint XT
25