Ricoh InfoPrint XT, Инструкция по установке и эксплуатации

Страница: 47 / 202

The parameters that you can assign are -g , -r , -t , and -x . These parameters
correspond to a subset of the processing parameters that you can specify with the
pdxtx2afp command.
These rules apply to the parameter mapping file:
v
You must use lowercase keyword names in the mapping file: class , dest , forms ,
jobid , or jobname .
v The values for the keywords are case-sensitive. For example, prt1 and PRT1 are
two distinct values.
v
You can use asterisks and question marks as wildcard characters for keyword
values. You can also use brackets to specify ranges of characters:
– To specify all jobs whose names begin with
ORB
:
jobname=ORB*
– To specify all jobs with a destination of PRT , followed by any three
characters:
dest=PRT???
– To specify all jobs with a class value of any single character from A through
M :
class=[A-M]
v You cannot use wildcard characters or regular expressions to define the keyword
to match. For example, job* is not valid for matching both the jobid and
jobname
keywords.
v
InfoPrint XT ignores blank lines and comment lines. Lines that begin with a
number sign, # , are comments.
v
All keyword=value pairs must start in column one. The expression must include
the equal sign, = , and the expression cannot contain spaces.
v
Parameter lines cannot start in column one; use at least one space before the
parameter.
v
When a keyword match occurs, InfoPrint XT applies all the parameter lines that
follow, up to the next keyword line or the end of the file.
v You cannot include comments on keyword lines or parameter lines.
v
Two or more keywords on a single line represent an and condition. Jobs must
match all keywords to use the associated parameters.
v
Two or more keywords on separate lines represent an or condition. Jobs can
match any one of the keywords to use the associated parameters.
v
InfoPrint XT checks each keyword group in the file. A job can match more than
one keyword group, so it uses parameters from several groups. For the -g , -r ,
and -t parameters, if the job matches several keywords groups that specify the
same parameter, InfoPrint XT uses the value from the last group. For the -x
parameter, InfoPrint XT merges all different conversion parameters together in
the final pdxtx2afp command. For example, if one keyword group specifies -x
xcopies=5 and another specifies -x xclb=pay1 , InfoPrint XT includes both
xcopies and xclb in the final command. If more than one keyword group
specifies the same parameter, for example -x xjdl=strton and -x xjdl=dpljdl ,
InfoPrint XT uses the last value.
Figure 2 on page 28 is an example of a completed parameter mapping file.
Chapter 3. Customizing InfoPrint XT
27