Ricoh InfoPrint XT, Инструкция по установке и эксплуатации

Страница: 35 / 202

ETIMEDOUT The pdls command did not respond to a query.
other Any other return codes that are not in this list are return codes
from C functions. See “Return code numbers” on page 113 for
explanations.
+ — — — — — – — End of Programming Interface information — — — — — - — +
Using the pdxtsetdest command to update InfoPrint Manager
actual destinations
Use the pdxtsetdest command to set up an InfoPrint Manager actual destination to
accept and process Xerox Line Conditioned Data Stream (LCDS) jobs and Xerox
metacode jobs. The
pdxtsetdest
command sets these attributes for the actual
destination:
v
document-formats-supported
InfoPrint XT adds lcds and metacode to the values already supported by the
actual destination.
v
transform-sequence
InfoPrint XT adds x2afp to the values already supported by the actual
destination.
+ — — — — — — — – — Programming Interface information — — — — — — – — — +
The syntax of the pdxtsetdest command is:
pdxtsetdest adestname [...]
adestname [...]
Specifies the name of one or more InfoPrint Manager actual destinations.
Usage notes
These items apply when you use the pdxtsetdest command:
v You must create the InfoPrint XT configurable transform object before you enter
the pdxtsetdest command. See page 14.
v
The user account from which you enter the pdxtsetdest command must have
InfoPrint Manager authorization to enter these commands for actual
destinations:
– pddisable
– pdenable
– pdls
– pdset
Streams used by the pdxtsetdest command
The pdxtsetdest command uses some file descriptors while it configures actual
destinations and ignores others:
fd0 (STDIN) The command does not use this stream.
fd1 (STDOUT)
The command does not use this stream.
fd2 (STDERR)
The command writes messages to this stream.
Chapter 2. Installing and configuring InfoPrint XT
15