Ricoh InfoPrint 1754dn, Руководство пользователя

Страница: 89 / 110

Solving option problems
89
Troubleshooting
Solving option problems
If an option does not operate correctly after it is installed or if it quits working:
• Turn the printer off, wait for about 10 seconds, and turn the printer on. If this does not fix the problem, unplug the
printer, and check the connection between the option and printer.
• Print the menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, reinstall it. For more informations, see
Printing a menu settings page .
• Make sure the option is selected in the software application you are using.
The following table lists printer options and suggested corrective actions for related problems. If the suggested corrective
action does not fix the problem, call your service representative.
Option Action
Drawers • Make sure the connection between drawers and the printer is secure.
• Make sure the print media is loaded correctly.
Duplex unit Make sure the connection between the duplex unit and the printer is secure. If the duplex
unit is listed on the menu settings page, but print media jams when it enters or exits the
duplex unit, the printer and duplex unit may not be properly aligned.
Flash memory Make sure flash memory is securely connected to the printer system board.
Hard disk with
adapter Make sure the hard disk is securely connected to the printer system board.
Internal print
server • Make sure the internal print server (also called an internal network adapter or INA) is
securely connected to the printer system board.
• Make sure you are using the correct cable, that it is securely connected, and the
network software is correctly set up.
For more details, see the Software and Documentation CD that shipped with your printer.
High capacity
feeder See Solving high capacity feeder problems .
Printer memory Make sure printer memory is securely connected to the printer system board.
Serial/Parallel
interface • Make sure the Serial/parallel interface card is securely connected to the printer system
board.
• Make sure you are using the correct cable and that it is securely connected.