Ricoh InfoPrint 1754dn Скачать руководство пользователя страница 78

Страница: 78 / 110

Adjusting Power Saver

Administrative support

Adjusting Power Saver

To adjust the

Power Saver

setting:

Make sure the printer is on and

Ready

appears on the display.

Press

on the operator panel.

Press

until

Settings

appears, and then press

Press

until

Setup Menu

appears, and then press

Press

until

Power Saver

appears, and then press

Using the right and left arrows on the operator panel, enter the number of minutes for the printer to wait before
entering Power Saver.

The settings available range from 1–240 minutes.

Press .

Submitting Selection

appears.

Note:

You can also adjust the Power Saver setting by issuing a Printer Job Language (PJL) command.

Encrypting the disk

Warning:

All resources on the hard disk and RAM will be deleted.

Note:

This setting is only available when a hard disk is installed.

Turn the printer off.

Press and hold

and

while turning the printer on.

Release both buttons when

Performing Self Test

appears on the display.

The printer performs its power-on sequence, and then

Config Menu

appears on the first line of the display.

Press

until

Disk Encryption

appears, and then press

Press

until

Enable

appears, and then press

Contents will be lost. Continue?

appears.

Press

until

Yes

appears, and then press

The Encrypting Disk progress bar appears.

When disk encryption has finished, press

Press

until

Exit Config Menu

appears, and then press

To disable disk encryption:

Turn the printer off.

Press and hold

and

while turning the printer on.

Release both buttons when

Performing Self Test

appears on the display.

The printer performs its power-on sequence, and then

Config Menu

appears on the first line of the display.

Press

until

Disk Encryption

appears, and then press

Press

until

Disable

appears, and then press

Contents will be lost. Continue?

appears.

Содержание InfoPrint 1754dn















































































































Результаты поиска

Содержание InfoPrint 1754dn

Отзывы:

Похожие инструкции для InfoPrint 1754dn

Бренды по названию

Популярные бренды

Ricoh InfoPrint 1754dn, Руководство пользователя

Результаты поиска

Содержание InfoPrint 1754dn

Отзывы:

Похожие инструкции для InfoPrint 1754dn

Бренды по названию

Популярные бренды