Ricoh InfoPrint 1754dn Скачать руководство пользователя страница 16

Страница: 16 / 110

Installing memory and option cards

Installing and removing options

Installing a memory card

Follow the instructions in this section to install a printer memory card. Memory cards must have 100-pin connectors.

Note:

Memory cards designed for other printers may not work with your printer.

1 Remove the system board access cover. For more information, see

Removing the system board access cover

Warning:

Memory cards are easily damaged by static electricity. Touch something metal on the printer before
you touch a card.

Unpack the memory card.

Avoid touching the connection points along the edge of the card. Save the packaging.

Push open the latches on both ends of the memory connector.

Align the notches on the bottom of the card with the notches on the connector.

Push the memory card firmly into the connector until the latches on either end of the connector

snap

into place.

It may require some force to fully seat the card.

Make sure each latch fits over the notch on the end of the card.

Installing an “option-added” firmware card

Follow the instructions in this section to install an optional “option-added” firmware or flash memory card.

Note:

“Option-added” firmware and flash memory cards offered for other printers cannot be used with your
printer.

Only one of each type of card is supported.

Warning:

“Option-added” firmware and flash memory cards are easily damaged by static electricity. Touch
something metal on the printer before you touch a card.

Remove the system board access cover. For more information, see

Removing the system board access cover

Unpack the card.

Avoid touching the metal pins on the bottom of the card. Save the packaging.

Latch

Notch

Connection
points

Memory card
connector

Содержание InfoPrint 1754dn















































































































Результаты поиска

Содержание InfoPrint 1754dn

Отзывы:

Похожие инструкции для InfoPrint 1754dn

Бренды по названию

Популярные бренды

Ricoh InfoPrint 1754dn, Руководство пользователя

Результаты поиска

Содержание InfoPrint 1754dn

Отзывы:

Похожие инструкции для InfoPrint 1754dn

Бренды по названию

Популярные бренды