Ricoh G-P3, Руководство по обслуживанию

Страница: 31 / 413

If this SP is enabled, an alert message is
displayed when the PCUs need to be
replaced.
Meter Click
Charge:
Image Transfer
Belt Unit
SP5-930-014
Enables or disables the PM alert for the
image transfer belt unit.
If this SP is enabled, an alert message is
displayed when the image transfer belt
unit needs to be replaced.
"1": No alert
Meter Click
Charge:
Fusing Unit
SP5-930-016
Enables or disables the PM alert for the
fusing unit.
If this SP is enabled, an alert message is
displayed when the fusing unit needs to be
replaced.
"1": No alert
Counter
method
SP5-045-001
Specifies if the counting method used in
meter charge mode is based on
developments or prints.
“1”: Prints
Service Tel:
Telephone /
Facsimile
SP5-812-001 and
-002
-001: shows or sets the telephone number
of the service representative.
-002: shows or sets the fax number of the
service station. The number is printed on
the counter list when the "Meter Click
Charge" is enabled. User can send a fax
message with the counter list.
-
Moving the Machine
This section shows you how to manually move the machine from one floor to another floor. See the section
“Transporting the Machine” if you have to pack the machine and move it a longer distance.
• Remove all trays from the optional paper feed unit.
Transporting the Machine
1. Make sure there is no paper left in the paper trays.
2. Do one of the following:
• Attach shipping tape to the covers and doors.
• Shrink-wrap the machine tightly.
1. Installation Procedure
30
1