Ricoh G-P3, Руководство по обслуживанию

Страница: 236 / 413

3162 [P. Pattern] ID Sensor Pattern Setting ([Color])
3162 001 M/A: [K] *EGB
Displays the toner amount of the ID sensor pattern
for each mode.
[0 to 1.000 / 0 / 0.001 mg/cm
2
/step]
3162 002 M/A: [M] *EGB
3162 003 M/A: [C] *EGB
3162 004 M/A: [Y] *EGB
3171 [P. Pattern] ID Sensor Pattern Setting ([Color]) DFU
3171 001 Interval: [K] *EGB
Adjusts the interval of making the ID sensor pattern.
[0 to 200 / 150 / 1 sheet/step]
3171 002 Interval: [MCY] *EGB [0 to 200 / 200 / 1 sheet/step]
3202 [Toner Near End] Toner Near End ([Color])
3202 001 Counter: [K] *EGB
Displays the counter of the toner near end for each
mode.
[0 to 30 / 0 / 1/step]
3202 002 Counter: [M] *EGB
3202 003 Counter: [C] *EGB
3202 004 Counter: [Y] *EGB
3301 [Toner Mode] Toner Supply Control ([Color])
3301 001 [K] *EGB Selects the method of the toner suppy for each
mode.
[0 to 3 / 3 / 1/step]
0: Fixed, 1: Coefficient (Pixel),
2: Coefficient (TD sensor), 3: Hybrid
See ‘Detailed Section Descriptions – Process
Control – Toner Near-end/Toner End Detection’
3301 002 [M] *EGB
3301 003 [C] *EGB
3301 004 [Y] *EGB
3302 [Toner Mode] Toner Supply Control ([Color])
3302 001 Fixed Rate: [K] *EGB Adjusts the toner supply rate for each mode. These
SPs are enabled only when SP3301 for each color
is set to “0”.
[0 to 100 / 5 / 1%/step]
3302 002 Fixed Rate: [M] *EGB
Service Mode Table
235
5