Ricoh FT7950 Скачать руководство пользователя

Страница: 94 / 140

WHAT TO DO IF SOMETHING GOES WRONG

CAUTION:

• To pull out the toner bottle, be sure to hold

the holder and turn it 90 degrees.

Remove the cap.

Note

• Do not remove the inner

cap.

Open the front cover of the
machine.

Pull the holder beneath the
toner bottle 90 degrees
backward.

Pull the green holder and
slowly pull out the toner
bottle.

Return the holder beneath
the toner bottle into its origi-
nal position.

Close the front cover of the
machine.

Hold a new bottle horizon-
tally and shake it 5 or 6
times.

Place the toner bottle in

position, then push it in
until the green lever clicks.

Note

• If you can’t get it to click

in, pull out the toner
bottle a little, slightly ro-
tate it to the left or right,
then try again.

Содержание FT7950













































































































































Результаты поиска

Содержание FT7950

Отзывы:

Похожие инструкции для FT7950

Бренды по названию

Популярные бренды

Ricoh FT7950, Руководство по эксплуатации

Результаты поиска

Содержание FT7950

Отзывы:

Похожие инструкции для FT7950

Бренды по названию

Популярные бренды