Ricoh FT7950, Руководство по эксплуатации

Страница: 34 / 140

20
COPYING
Auto Start
You can make copy settings and press the
{
Start
}
key when the message “Please Wait”
is on (The
{
Start
}
key flashes in red and green
alternately). This function is called “Auto
Start.”
Note
❏
The machine gets ready for copying ap-
proximately in 5 minutes after power is
turned on.
Auto Reset
The machine returns to its initial condition
automatically after your job is finished, after
a certain period of time. This function is called
“Auto Reset.”
Note
❏
You can change the Auto Reset time. See
⇒
P.97 “Auto reset.”
❏
The machine might not reset itself auto-
matically in the following cases:
• Originals are left uncopied.
• The machine senses the presence of a
human body.
Screen Saver
The machine automatically clears the panel
display after your job is finished, after a cer-
tain period of time. This function is called
“Screen Saver.”
Note
❏
You can change the Screen Saver time. See
⇒
P.96 “Screen Saver.”
Low Power Timer
The machine enters the energy saver mode
when you take no action for a certain period
after your job is finished. This function is
called “Low Power Timer.”
Note
❏
You can set the time after which the en-
ergy saver mode is entered. See
⇒
P.97
“Low Power Timer.”
❏
The machine exits the energy saver mode
and gets ready for copy processing when a
human moves on before the front of the
machine (Auto Response Sensor).
Auto Off
The machine turns itself off automatically af-
ter your job is finished, after a certain period
of time. This function is called “Auto off.”
Note
❏
You can set the Auto off time. See
⇒
P.97
“Auto off.”