Ricoh FT7950, Руководство по эксплуатации

Страница: 56 / 140

42
COPYING
2
Define the contents of a Presetting Copy
Job.
Note
❏
Press the [Cancel] key to cancel the con-
tents of the Presetting Copy Job being ed-
ited.
3
Set your originals in the document feeder
and press the [OK] key.
Processing of the Presetting Copy Job au-
tomatically starts after the current copy pro-
cessing is completed.
Sample Copy
You can make a test copy and check the fin-
ishing before or during a copy session to
verify the density, reproduction ratio, margin
adjustment, save/delete area, and centering sta-
tus.
Note
❏
A copy sheet is generated during a test
copy according to the current settings, re-
gardless of the current number of copies
setting.
1
Select the functions you want to use and
enter the number of copies.
2
Set your originals.
Note
❏
Press the
{
Clear/Stop
}
key to make a test
copy in the middle of a copy session.
3
Press the
{
Sample Copy
}
key.
The machine copies and generates one
sheet.
Note
❏
Press the
{
#
}
key to suppress the genera-
tion of the copy.
4
After examining the finishing, press the
{
Start
}
key if the test copy proves nor-
mal.
Note
❏
To change a setting after examining the fin-
ishing, select and reset the corresponding
function.
❏
2-Sided is selected, the machine performs
a 2-sided copy for the original that is set in
the document feeder or on the exposure
glass and generates a sheet with both sides
copied.
❏
Sort or Stack functions cannot select the
Sample Copy together when your copier
is equipped with the S/S hanging-on type.
❏
The Thick Paper mode cannot select the
Sample Copy together when your copier
is equipped with the S/S console type.
❏
The Sample Copy cannot select when the
Duplex mode is interrupted.