Ricoh FT4460, Руководство по обслуживанию, Страница: 198 / 413

21 April 1989
4.7 MISFEED TABLE
4.7.1 Location of Jams/Number of Jams (SP Mode #131)
The number of jams in each area mentioned in the following table can be
checked using the following procedure:
1.
2.
3 .
4.
Enter “1 31” using the numeric keys.
Press the Enter (#) key.
Select the desired FC code (Function Code) according to the table.
The FC code can be selected with the “+” and “-” (zoom “up” and “down”)
keys.
Press the “.” key to display the jam counter in the second three digits of
the Magnification indicator.
Release the “.” key to display the first three digits.
FC Code
1
2
3
4
5
6
7
8
9
10
11
Jam Area / Detection
Registration jams (This includes 1st/2nd feed
station jams) (Registration Sensor not ON)
3rd feed station (Upper Relay Sensor not ON)
4th feed station (Not used)
5th feed station (Not used)
Paper is not fed from the Multi Duplex/Overlay
unit and the inverter relay sensor in the copier
is not activated when making multi duplex
copies. (Inverter Relay Sensor not ON)
Inverter sensor is not activated in the Multi
Overlay mode. (Inverter Sensor not ON)
Paper is not fed to the fusing unit
(Fusing Exit Sensor not ON)
Paper jams in the fusing unit
(Fusing Exit Sensor not OFF)
Paper is not fed to the sorter unit
(Paper Sensor not ON)
Paper jams in the sorter unit
(Paper Sensor not OFF)
Paper does not reach the paper exit sensor
in the Multi Duplex/Overlay unit.
(Paper Exit Sensor not ON)
4-38
Sensor
A
B
C
E
H
H
G
G
F