Ricoh FT4460, Руководство по обслуживанию, Страница: 177 / 413

28 February 1989
Mode No. Function
29 Fusing
Temperature
Control
30 Black Toner
Supply Mode
31 Black Toner
supply
Amount (ID
Sensor Mode)
32 Black Toner
Supply
Amount
(Fixed)
33 ID Sensor
Bias (Black)
*34 ADS Adjust-
ment (Bias
shift)
Selects fusing
temperature control
mode.
Selects black toner
supply system.
Determines how
much toner is sup-
plied in ID sensor
mode.
Determines how
much toner is sup-
plied in fixed mode.
Sets the bias volt-
age applied to the
developer roller
when sensing
image density.
Adjusts the image
density in ADS
mode.
35 Black Toner
ID sensor check is
Supply Detec-
performed every 5
tion copies or 10 copies.
*36 Margin Ad-
justment
37 Black Bias
Adjustment
Selects the present
margin adjustment
value.
Adjusts black bias
output if the Image
density in level 4
can not be adjusted
using Light Intensity
Adjustment mode
(SP 48).
Data
0: ON/OFF
control
1: Phase
control
0: ID sensor
1: Fixed Supply
0: 15%
1: 7%
2: 30%
3: 60%
0: 7%
1: 3.5%
2: 10.5%
3: 14%
0: -260V
1: -220V
2: -280V
3: -300V
0: Normal
1: Darker
2: Lighter
0: 10 copies
1: 5 copies
0: 5 mm
1: 10 mm
2: 15 mm
0: Present Bias
1: Present Bias
+ (+40V)
2: Present Bias
+ (+20V)
3: Present Bias
+ (-20V)
4: Present Bias
+ (-40V)
Factory
Setting
0
0
0
0
0
0
0
0
Comments
After the selected
mode is set and
the main switch
turns off/on, the
fusing temperature
control is changed.
See SP31/SP32 for
ratios.
-260V = normal
-220V = lighter
-280V = darker
-300V = darkest
1: Shifts bias
output (+40V)
2: Shifts exposure
lamp voltage
(+2V)
This prevents low
image density
before toner end
detection.
When using mar-
gin adjustment
mode.
0: Normal
1: Darkest
2: Darker
3: Lighter
4: Lightest
NOTE: Present
Bias = Standard
Bias
4-17