Ricoh FAX880 MP, Руководство оператора

Страница: 205 / 261

❐
Never install telephone wiring during a lightning storm.
❐
Never install telephone jack in wet locations
❐
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
❐
Use caution when installing or modifying telephone lines.
❐
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
❐
Do not use the telephone to report a gas leak in the vicinity of leak.
Attaching The Telephone Handset
1
First, attach the handset holder to its
bracket using the two screws, as shown
in the diagram opposite. (Be careful not
to screw them in too tightly.)
NOTE: Use a coin to screw them in.
2
Fit the cover over the heads of the
screws.
3
Install the bracket onto the machine
(see the diagram opposite).
4
Rest the handset in its holder.
5
To avoid slack wire hanging at the rear
of the machine, slot the handset lead
into the holder as shown.
6
Plug the handset jack into the lower
socket labelled "TEL" on the side of
the machine
INSTALLATION
194