Ricoh D067, Руководство по обслуживанию

Страница: 524 / 676

Fax Error Codes
SM Appendix 6-25 D067/D068/D069/D072
Appe
ndix:
Fax T
rou
ble-
shooting
Guide
Code Meaning Suggested Cause/Action
15-95 Transfer Station Function
ƒ
The machine rejected an incoming e-mail for
transfer because the transfer function was
unavailable.
22-00
Original length exceeded
the maximum scan length
ƒ Divide the original into more than one page.
ƒ
Check the resolution used for scanning. Lower
the scan resolution if possible.
ƒ Add optional page memory.
22-01
Memory overflow while
receiving
ƒ Wait for the files in the queue to be sent.
ƒ
Delete unnecessary files from memory.
ƒ Transfer the substitute reception files to an
another fax machine, if the machine’s printer is
busy or out of order.
ƒ Add an optional SAF memory card or hard
disk.
22-02
Tx or rx job stalled due to
line disconnection at the
other end
ƒ The job started normally but did not finish
normally; data may or may not have been
received fully.
ƒ Restart the machine.
22-04
The machine cannot store
received data in the SAF
ƒ Update the ROM
ƒ Replace the FCU.
22-05
No G3 parameter
confirmation answer
ƒ Defective FCU board or firmware.
23-00
Data read timeout during
construction
ƒ Restart the machine.
ƒ Replace the FCU.