Ricoh D067, Руководство по обслуживанию

Страница: 506 / 676

Fax Error Codes
SM Appendix 6-7 D067/D068/D069/D072
Appe
ndix:
Fax T
rou
ble-
shooting
Guide
Code Meaning Suggested Cause/Action
0-74
The calling terminal fell
back to T.30 mode,
because it could not detect
ANSam after sending CI.
ƒ
The calling terminal could not detect ANSam
due to noise, etc.
ƒ ANSam was too short to detect.
ƒ Check the line connection and condition.
ƒ Try making a call to another V.8/V.34 fax.
0-75
The called terminal fell
back to T.30 mode,
because it could not detect
a CM in response to
ANSam (ANSam timeout).
ƒ The terminal could not detect ANSam.
ƒ Check the line connection and condition.
ƒ Try receiving a call from another V.8/V.34 fax.
0-76
The calling terminal fell
back to T.30 mode,
because it could not detect
a JM in response to CM
(CM timeout).
ƒ The called terminal could not detect a CM due
to noise, etc.
ƒ Check the line connection and condition.
ƒ Try making a call to another V.8/V.34 fax.
0-77
The called terminal fell
back to T.30 mode,
because it could not detect
a CJ in response to JM
(JM timeout).
ƒ The calling terminal could not detect a JM due
to noise, etc.
ƒ A network that has narrow bandwidth cannot
pass JM to the other end.
ƒ Check the line connection and condition.
ƒ Try receiving a call from another V.8/V.34 fax.
0-79
The called terminal
detected CI while waiting
for a V.21 signal.
ƒ
Check for line noise or other line problems.
ƒ If this error occurs, the called terminal falls
back to T.30 mode.