Ricoh D067, Руководство по обслуживанию

Страница: 199 / 676

Using SP Mode (F/SPF: D068/D069)
SM 6-7 D067/D068/D069/D072
Syste
m
Ma
in
te
na
n
ce
Referen
ce
Firmware Update Procedure
ƒ Before beginning the following, first confirm which firmware version(s) are
currently installed in the machine with SP7-801-255.
-SD Card Preparation-
1. Format an SD card with, for example, SD Formatter v1.1.
2. Create a “romdata” folder on the card.
3. Create the following folders within the “romdata” folder: D067, D068, D069, D072.
4. Download the firmware from the server and store the files in the folder with the
corresponding model code on the SD card.
Example:
File D067550B should be stored in the “D067” folder, whereas files D4685528B,
D4685540A, and D4685525B should be stored in the “D468” folder.
-Firmware Update-
ƒ Do not put multiple machine firmware programs on the same SD card. Copy the
only model firmware you want.
1. Turn off the main power switch.
2. If the machine is connected to a network, disconnect the network cable from the
copier.
3. Remove the interface cover ( x 1)
4. With the label on the SD card facing the rear side of the machine, insert the SD card
into the slot 2 on the controller box. Slowly push the SD card into the slot so it locks in
place.
5. Make sure the SD card is locked in place.
(To remove the SD card, push it in to unlock the spring lock and then release it so it
pops out of the slot.)
6. Switch the main power switch on. After about 5 seconds, the LCD will display “Please
wait…” Then, about 60 seconds later, the LCD will display “Program UpDate Menu
P.01” on the first line and the name of the firmware on the second line (e.g.
System/Copy).