Ricoh BizWorkz 106 Скачать руководство пользователя страница 189

Страница: 189 / 422

TROUBLESHOOTING

Pressing down on the paper release le-
ver (blue) on the right side, pull out
the misfed paper.

Pull out the misfed paper in the direc-
tions indicated by the arrows in the il-
lustrations.

Note

• If you are using the paper feed unit (op-

tion) and cannot clear the misfeed using this
procedure, use the procedure on page 47
instead.

• Sometimes toner may get on your hands.

Install the toner cassette into the ma-
chine.

Note

• Be sure to hold the toner cassette by its handle.
• Keep the toner cassette horizontal to avoid

spilling the toner.

• Refer to page 2 for details on how to install

the toner cassette.

Close the top unit.

Important!

If a paper misfeed occurs during a copy job, make sure to specify the desired copy
quantity again.

Содержание BizWorkz 106







































































































































































































































































































































































































































Результаты поиска

Содержание BizWorkz 106

Отзывы:

Ricoh BizWorkz 106, Руководство по эксплуатации, Страница: 189 / 422

Результаты поиска

Содержание BizWorkz 106

Отзывы: