manualshive.com logo in svg

Ricoh BizWorkz 106, Руководство по эксплуатации, Страница: 107 / 422

Поделиться
Скачать
Ricoh BizWorkz 106 Скачать руководство пользователя страница 107

89

TROUBLESHOOTING

6. TROUBLE-

SHOOTING

3

Push back the blue paper release lever
located on the right.

 Note

The lever releases pressure on the paper. If
you do not push it back, you could damage
the machine when removing paper.

4

Pull out the misfed paper in the direc-
tions indicated by the arrows in the il-
lustrations.

 Note

• If you are using the paper feed unit (op-

tion) and cannot clear the misfeed using
this procedure.

☛

 Clearing a Micffeed in the Optional Paper

Feed Unit, see page 90.

• If toxner gets on your hands, wash them

immediately.

5

Install the toner cassette into the ma-
chine.

 Note

• Be sure to hold the toner cassette by its handle.
• Keep the toner cassette horizontal to avoid

spilling the toner.

☛

 Installing the toner cassette, see page 2.

6

Close the front unit.

 Note

If “Clear Paper” is still displayed after you
clear the jam, there may be paper jammed in
another part of the machine. Check all areas
described in this section

 Important!

If a paper misfeed occurs during a copy job, be sure to specify the desired copy
quantity again.

Содержание BizWorkz 106







































































































































































































































































































































































































































Отзывы:

Нет отзывов