Ricoh Aficio IS 2325, Инструкции по эксплуатации и устранению неисправностей

Страница: 70 / 126

Troubleshooting When Using the Scanner Function
62
5
Dest. authenti-
cation failed.
Check settings
and check
Scanned File
Status.
The entered user name or pass-
word was invalid. • Check that the user name and
password are correct.
• Check that the ID and pass-
word for the destination fold-
er are correct.
• A password of 128 or more char-
acters may not be recognized.
Sender's name is
not selected.
Specify send-
er's name.
The sender's name was not specified. A sender's name should be speci-
fied before sending e-mail. Send
e-mail after specifying the send-
er's name.
Cannot enter
manually more
than nnn desti-
nations.
(A figure is placed at n.)
The e-mail has too many (nnn or
more) destinations. Split the destinations into two or
more groups.
Cannot specify
more than nnn
destinations.
(A figure is placed at n.)
The e-mail has too many (nnn or
more) destinations. Split the destinations into two or
more groups.
The number of
destination
folders se-
lectable in one
time is limited
to nn.
(A figure is placed at n.)
The maximum number of desti-
nation folders that can be selected
at one time has been exceeded. Select nn or fewer destination
folders.
Exceeded max. E-
mail size. Send-
ing E-mail has
been cancelled.
The maximum e-mail size has
been exceeded. • Increase the size of [ Max. E-mail
Size ] .
• Set [ Divide & Send E-mail ] to [ On
(per page) ] or [ On (per max.
size) ] .
See “Send Settings”, General Set-
tings Guide.
Sending failed.
Check settings
and check
Scanned File
Status.
While a file was being sent, a net-
work error occurred and the file
could not be sent correctly. Try the operation once more. If
the message is still shown, the
network may be crowded. Con-
tact the administrator.
Press the
{
Job Information
}
key to
display the transmission results,
and then check which job has not
been sent. See “Confirmation Dis-
plays”, Scanner Reference.
Message Cause Solution