Ricoh Aficio IS 2325 Скачать руководство пользователя страница 23

Страница: 23 / 126

When You Cannot Make Clear Copies

A shadow appears on copies if
you use pasted originals.

Image density is too dark.

Adjust the image density set-
tings. See “Adjusting Image
Density”, Copy Reference.

Change the orientation of the
original.

Put mending tape over the
pasted areas.

The same copy area is dirty
whenever making copies.

The exposure glass or ARDF is
dirty.

Clean them. See p.113 “Main-
taining Your Machine”.

Copies are too light.

Image density is too light.

Adjust the image density set-
tings. See “Adjusting Image
Density”, Copy Reference.

Copies are too light.

The paper is damp or rough.

Use the recommended paper.
Also, use paper that has been
stored in the recommended
temperature and humidity
conditions. See “Copy Paper”,
About This Machine.

Copies are too light.

The toner bottle is almost
empty.

Add toner. See p.97 “Adding
Toner”.

Parts of the paper are not copied. The original is not placed correctly. Place originals correctly. See “Plac-

ing Originals”, Copy Reference.

Parts of the paper are not copied. The correct paper size is not

selected.

Select the proper paper size.

White lines appear.

The exposure glass or scan-
ning glass is dirty.

Clean them. See p.113 “Main-
taining Your Machine”.

Copies are blank.

The original is not placed correctly. When using the exposure glass,

place originals face down.
When using the ARDF, place
them face up. See “Placing
Originals”, Copy Reference.

A moiré pattern is produced
on copies.

Your original has a dot pat-
tern image or many lines.

Place the original on the expo-
sure glass at a slight angle.

Problem

Causes

Solutions

Содержание Aficio IS 2325































































































































Результаты поиска

Содержание Aficio IS 2325

Отзывы:

Похожие инструкции для Aficio IS 2325

Бренды по названию

Популярные бренды

Ricoh Aficio IS 2325, Инструкции по эксплуатации и устранению неисправностей

Результаты поиска

Содержание Aficio IS 2325

Отзывы:

Похожие инструкции для Aficio IS 2325

Бренды по названию

Популярные бренды