Rich electric Invertek SuperCombi SC-1500-12X, Руководство пользователя

Страница: 93 / 155

Rich Electric Co. “SuperCombi” User Manual V7.19 Copyright 2009
Page 93
C Group (INVERTER)
C1-01: INVERTER Output Voltage
Main Menu>Programming>ENT>Inverter>ENT
z
Use constant C1-01 to change the RMS output voltage of the INVERTER.
C1-02: Bat Low ?V Shut-down
Main Menu>Programming>ENT>Inverter>ENT
z
With this setting, one can determine the battery voltage at which level the INVERTER will
switch off. This can be useful to prevent drawing too much current from an exhausted battery.
z
This voltage level will always lie below the Bat Low ? V Restart (C1-03) level. In fact,
changing this level will also change the Bat Low ? V Restart (C1-03) level.
z
C1-03=C1-02+offset voltage
For example: SC-1500-122, when C1-02=9.3V, C1-03=10.9V, offset voltage=1.6V (10.9-9.3),
C1-03 will automatically go to 11.6V(10.0+1.6) after C1-02 is changed to 10.0V.
C1-03: Battery Low ? V Restart
Main Menu>Programming>ENT>Inverter>ENT
z
This setting forms a pair with Bat Low ? V Shut-down (C1-02). With this setting, one
determines the battery voltage at which level the INVERTER will switch on.
z
In fact, the parameter which is changed is the difference between Bat Low ? V Shut-down
(C1-02) and Bat Low ? V Restart (C1-03). The result of this is that when changing the Bat Low ?
V Shut-down (C1-02) level, this level also changes.
C1-04: Power Saving Select
Main Menu>Programming>ENT>Inverter>ENT
z
When there is no AC load connected to the SuperCombi, set C1-04=1 (Initial setting)
to active the power saving function by reducing the AC output voltage to be 144V
for 230V model and to be 72 for 110V model.
z
Setting C1-04=0 can disable the auto power saving and the output voltage would be
Continuously supplied to the AC Output even when there is no load connected.