Rich electric Invertek CombiPlus, Руководство пользователя

Страница: 51 / 128

Rich Electric Co. “CombiPlus” User Manual V7.19 Copyright 2009
Page 51
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-13 to monitor the elapsed time after power ON (O2-03=0) or after
RUN (O2-03=1) in unit of 1 hour when the current fault occurs.
U2-14: Solar Charger Status
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-14 to monitor solar charger status when the current fault occurs.
This constant is only visible when extension port is connected to solar module.
U2-15: Solar Charge Current
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-15 to monitor the solar charge current value in unit of 0.1A when
the current fault occurs.
U2-16: Solar Supply Power
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-16 to monitor the solar supply power value in unit of 1W when the
current fault occurs.
U2-17: Solar Amp-Hours
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-17 to monitor solar Amp-Hours value in unit of 1AH when the
current fault occurs.
U2-18: Solar Total Amp-Hours
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-18 to monitor solar total Amp-Hours value in unit of 1AH when the
current fault occurs.
U2-26: Battery Temperature Sensor
Main Menu>Operation>ENT>Fault Trace>ENT>
z
Use constant U2-26 to monitor the current temperature that has been detected by
Battery Temperature Sensor (BTS-3) in unit of 1
℃
when the current fault occurs.
4.8 Main Menu : Operation “Fault History”